☠️ WARNING ☠️ Turn OFF and unplug the machine before starting.
Use the cabinet key to open the lower right panel on the back of the machine.
Rear of machine
With a Phillips head screwdriver, loosen the duct hose clamps and remove the hose from the fan and the back of the machine.
Duct hose clamps, hose
Unscrew the four bolts that hold the fan to cabinet floor.
Fan bolted to cabinet floor
Follow the two wires marked "Fan" to the lever DIN connectors.
Lever DIN connectors
Flip up the orange lever to release the wire and gently pull the wire out of the connector.
Lever DIN connectors
Follow the green and yellow ground wire from the fan to the ground bar. With a Phillips head screwdriver disconnect the ground wire from the ground bar.
Green and yellow ground wire, ground bar
Lift up the fan and remove it from the cabinet.
Fan
Updated
on 20 May 2023
Choosing a selection results in a full page refresh.
