Unboxing and Setting Up Your NOVA

Read through these guidelines fully before attempting to do unbox and setup your machine.

Disclaimer: These are suggestions. AEON Laser USA is not responsible for any damage or injury that may occur from moving the machine.

🛑 STOP: Before you begin, please make sure you inspect the crate for any damage. Remember, the time to report any damage during shipment is now. There will be no recourse if damage is reported several days from now. 👉 Follow the instructions to Inspect and Report Damage.

Uncrate Your Machine

In this step-by-step tutorial, Aeon Laser USA Brand Ambassador, Emily Caroline, will guide you through the process of uncrating an Aeon NOVA CO2 laser.

Whether you're a seasoned pro or just starting out with laser cutting technology, this video provides valuable insights to ensure a smooth unboxing experience.

Setup Your Machine

Check Alignment

📌 Note: More often than not the lasers will retain the alignment done at Aeon Laser USA.

It is highly recommended that you simply follow the alignment video below without making any adjustments.

If you feel that something is off, please email support with the photos of each individual burn mark. Our Support Team will be able to compare them to the photos we took prior to shipping.

First Engrave

Setup LightBurn

Before Machine Arrival

Please make sure you follow the installation instructions titled, "Before Your Machine Arrives":
Before Your Machine Arrives - Free Trial - Mac
Before Your Machine Arrives - Free Trial - PC
Before Your Machine Arrives - License Key - Mac
Before Your Machine Arrives - License Key - PC

After Machine Arrival

Once your machine arrives, we recommend deleting the manually created device in LightBurn and setting up a new device from scratch using the installation instructions titled, "After Your Machine Arrives":
After Your Machine Arrives - License Key - Mac
After Your Machine Arrives - License Key - PC

Learn How to Use LightBurn

Check out the LightBurn Support Docs to get started.