The REDLINE Series by AEON Laser

See the NEW Redline product pages for pricing, specs, addons, and more details:
MIRA S Redline
MIRA Pro S Redline
NOVA S Redline
Super NOVA S Redline

Please Shedule a Demo is you would like to schedule a visit to see machines in person at our showroom.

Check out our Events Schedule to see if we're coming to a city near you.

If you can't make it in person, See First Impressions on our Youtube Channel by other laser professionals.

Shipping of Redline lasers is underway. Contact us for the latest lead times. You can see the latest shipments on our laser tracker.

CO2 lasers are commonly used for various applications like cutting, engraving, and marking. The type of laser tube used in these devices plays a crucial role in their performance, lifespan, and maintenance requirements. Here's a breakdown of the differences between glass tubes, RF metal tubes, and RF ceramic tubes in CO2 lasers:

Glass Tube

• Material: These are typically made from sealed glass containing a CO2 gas mixture. The electrodes are often copper.
• Excitation Method: Glass tubes use DC (Direct Current) excitation. The electrical discharge happens directly through the gas mixture to create the laser beam.
• Cooling: Requires external water cooling systems. Proper cooling is essential to avoid overheating and extend tube life.
• Cost: Relatively inexpensive and widely used in consumer and hobbyist CO2 lasers.
• Applications: Suitable for small-scale operations and hobbyist projects.

RF Metal Tube

• Material: Made from metal, these tubes are designed to withstand higher power and are more robust.
• Excitation Method: RF (Radio Frequency) excitation, where an external RF generator powers the tube without direct contact with the gas mixture.
• Cooling: Can often be air-cooled due to the efficient RF excitation, though some high-power tubes require water cooling.
• Cost: More expensive than glass tubes but offer greater durability and lower maintenance.
• Applications: Ideal for industrial settings and high-power applications due to their longer lifespan and robustness.

Key Factors to consider when comparing RF Laser Tubes and DC glass Laser Tubes

1. Beam Profile The beam profile plays a significant role in cutting quality. You ideally want a larger beam diameter going into the lens to cut well. An RF tube uses a beam expander (typically 2.5x) but beam expanders don't allow for enough size increase to match a glass laser tube. Glass laser tubes have an advantage here.

2. Pulses vs Continuous Power 2. RF laser tubes operate in pulses, similar to a light switch flicking on and off thousands of times a second. A glass laser tube stays on continuously, providing uninterrupted power. This leads to smoother cutting, as there's no delay or pause between pulses.

Cutting Clear Acrylic - RF Laser Tube vs Glass Laser Tube

Here are some example test cuts on Acrylic in both 1/8” (3mm) and 1/4” (6mm), using a 60w RF tube vs a 60w Glass tube. Both machines are using a 2” lens.

RF on the left, glass on the right.

RF on the left, glass on the right.

RF on the left, glass on the right.

RF on the left, glass on the right.

Note: The RF laser tube offers great edges when cutting thin materials. However, with thicker materials, the edge quality begins to suffer with the RF tube; this is where a glass laser tube really shines.

Yes, the REDLINE models are compatible with all of the rotary attachments we offer, including: Smart Rotary, Rotary Chuck, Mult-Roller, Rotoboss and PiBurn.

Yes, it will fit. We tested a 40oz Stanley Dupe Tumbler in a MIRA5 S Redline laser using a PiBurn Grip rotary at the correct focal height for a 2.5-inch lens. The tumbler fits comfortably with the blade table still in place, leaving room to spare.

For reference, the Z Axis Travel Height on the MIRA5 S and MIRA7 S is 5-1/5″ (140mm), MIRA9 S is 5-7/8″ (150mm). All NOVA S and Super NOVA S models are 7-7/8″ (200mm).

Front view, 40oz Stanley Dupe Tumbler in a MIRA5 S with PiBurn Grip

Overhead view, 40oz Stanley Dupe Tumbler in a MIRA5 S with PiBurn Grip

The MIRA7 S is the only one that got a larger work area, going from 450mm to 500mm on the Y axis.

Unfortunately, no. The Redline models have been redesigned from the ground up.

We do not offer trade-ins on any models.